\n
1. Support for 10th Generation Intel Core™ i9 processors/Intel Core™ i7 processors/Intel Core™ i5 processors/Intel Core™ i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1200 package up to 65W
\n
2. L3 cache varies with CPU
\n

\n
1. Intel H410 Express Chipset
\n

\n
1. 2 x DDR4 SO-DIMM socket supporting up to 32 GB of system memory
\n
2. Support for DDR4 2666/2933 MHz memory modules
\n

Integrated Graphics Processor-Intel HD Graphics support:

\n
1. 1 x D-Sub port (Optional and share with one HDMI1.4 Port, Default support HDMI)
\n
2. 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
   * Support for HDMI 2.0 version, HDCP 2.2, and HDR.
\n
3. 2 x HDMI1.4a, supporting a maximum resolution of 4096 x 2160@30Hz
\n

Support for up to 2 displays at the same time
Maximum shared memory of 1 GB

\n
1. Realtek ALC887 codec
\n
2. High Definition Audio
\n
3. 2/4/5.1-channel
\n

\n
1. 2 x Intel GbE LAN chips (10/100/1000 Mbit)
\n

\n
1. Infineon chip, supporting TPM 2.0 (Optional)
\n

\n
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
   (The PCIEX16 slot conforms to PCI Express 3.0 standard.)
\n
2. 1 x M.2 Socket 1 connector for PCIe wireless module
\n
3. 1 x full size Mini PCIe connector (MSATA_PCIE)
   The MSATA_PCIE slot shares bandwidth with the SATA3 2 connector. When an MSATA SSD is populated, the SATA3 2 connector becomes unavailable.
   The MSATA_PCIE connector can also be used as an MSATA connector.
   (The Mini PCI Express slot conforms to PCI Express 2.0 standard.)
\n

Chipset:

\n
1. 1 x M.2 connector on the top of the motherboard (Socket 3, M key, type 2280 SATA and PCIe x1 SSD support)
\n
2. 2 x SATA 6Gb/s connectors
\n

Chipset:

\n
1. 4 x USB 3.0/2.0 ports on the back panel
\n
2. 4 x USB 2.0/1.1 ports available through the internal USB headers
\n

\n
1. 1 x 4-pin ATX 12V power connector
\n
2. 1 x CPU fan header
\n
3. 1 x system fan header
\n
4. 1 x M.2 Socket 3 connector on the back of the motherboard
\n
5. 2 x SATA 6Gb/s connectors
\n
6. 1 x Mini PCIe/MSATA connector
\n
7. 1 x USIM connector on the back of the motherboard
\n
8. 1 x front panel header
\n
9. 1 x front panel audio header
\n
10. 1 x battery power cable connector
\n
11. 2 x USB 2.0/1.1 headers
\n
12. 4 x serial port power select jumpers
\n
13. 1 x AT/ATX mode switch jumper (AT_ATX)
\n
14. 4 x serial port
\n
15. 1 x SATA Power connector
\n
16. 1 x GPIO header
\n
17. 1 x LVDS header
\n
18. 1 x LVDS drive voltage jumper (LCD_VCC)
\n
19. 1 x flat panel display switch header (MON_SW)
\n
20. 1 x flat panel display header (FPD)
\n
21. 1 x speaker header (SPKR)
\n
22. 1 x buzzer header (SPEAKER)
\n
23. 1 x Clear CMOS jumper
\n
24. 1 x chassis intrusion header
\n
25. 1 x I2C header
\n
26. 1 x SMbus header
\n

\n
1. 4 x USB 3.0/2.0 ports
\n
2. 2 x RJ-45 ports
\n
3. 1x HDMI2.0 port (Note)
\n
4. 2 x HDMI1.4a
\n
5. 2 x audio jacks
\n

\n
1. NuvoTon NCT6116D
\n

\n
1. Voltage detection
\n
2. Temperature detection
\n
3. Fan speed detection
\n
4. Overheating warning
\n
5. Fan fail warning
\n
6. Fan speed control
   * Whether the fan speed control function is supported will depend on the cooler you install.
\n

\n
1. 1 x 128 Mbit flash
\n
2. Use of licensed AMI UEFI BIOS
\n
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
\n

\n
1. Support for @BIOS
\n
2. Support for Q-Flash
\n

\n
1. Support for Windows 10 64-bit /Linux
\n

\n
1. Thin Mini ITX Form Factor: 17.0 x 17.0 cm
\n

\n
1. 0?°C to +60°C
\n